menu "LittlevGL (LVGL) Touch controller"

    config LVGL_TOUCH_CONTROLLER
		int
		default 0 if LVGL_TOUCH_CONTROLLER_NONE
		default 1 if LVGL_TOUCH_CONTROLLER_XPT2046
		default 2 if LVGL_TOUCH_CONTROLLER_FT6X06
		default 3 if LVGL_TOUCH_CONTROLLER_STMPE610

	choice
	    prompt "Select a touch panel controller model." if LVGL_PREDEFINED_DISPLAY_NONE || LVGL_PREDEFINED_DISPLAY_ERTFT0356
		default LVGL_TOUCH_CONTROLLER_NONE
	    help
		Select the controller for your touch panel.

	    config LVGL_TOUCH_CONTROLLER_NONE
		bool "None"
	    config LVGL_TOUCH_CONTROLLER_XPT2046
		bool "XPT2046"
	    config LVGL_TOUCH_CONTROLLER_FT6X06
        bool "FT6X06"
        config LVGL_TOUCH_CONTROLLER_STMPE610
        bool "STMPE610"
	endchoice
    
    menu "Touchpanel (XPT2046) Pin Assignments"
      visible if !LVGL_PREDEFINED_PINS && LVGL_TOUCH_CONTROLLER = 1

        config LVGL_TOUCH_SPI_MISO
            int
            prompt "GPIO for MISO (Master In Slave Out)"
	    range 0 39	
            default 35 if LVGL_PREDEFINED_PINS_38V1
            default 19

            help
            Configure the touchpanel MISO pin here.

        config LVGL_TOUCH_SPI_MOSI
            int
            prompt "GPIO for MOSI (Master Out Slave In)"
	    range 0 39	
            default 32 if LVGL_PREDEFINED_PINS_38V1
            default 23

            help
            Configure the touchpanel MOSI pin here.

        config LVGL_TOUCH_SPI_CLK
            int "GPIO for CLK (SCK / Serial Clock)"
	    range 0 39	
            default 26 if LVGL_PREDEFINED_PINS_38V1
            default 18
            help
            Configure the touchpanel CLK pin here.

        config LVGL_TOUCH_SPI_CS
            int "GPIO for CS (Slave Select)"
	    range 0 39	
            default 33 if LVGL_PREDEFINED_PINS_38V1
            default 5
            help
            Configure the touchpanel CS pin here.

        config LVGL_TOUCH_PIN_IRQ
            int "GPIO for IRQ (Interrupt Request)"
	    range 0 39	
            default 27 if LVGL_PREDEFINED_PINS_38V4
            default 25
            help
            Configure the touchpanel CS pin here.
    endmenu

    menu "Touchpanel (FT6X06) Pin Assignments"
      visible if LVGL_TOUCH_CONTROLLER = 2
        config LVGL_TOUCH_I2C_SDA
            int
            prompt "GPIO for SDA (I2C)"
        range 0 39
            default 21
            help
            Configure the I2C touchpanel SDA pin here.

        config LVGL_TOUCH_I2C_SCL
            int "GPIO for clock signal SCL (I2C)"
        range 0 39
            default 22
            help
            Configure the I2C touchpanel SCL pin here.
    endmenu
    
    menu "Touchpanel (STMPE610) Pin Assignments"
      visible if !LVGL_PREDEFINED_PINS && LVGL_TOUCH_CONTROLLER = 3

        config LVGL_TOUCH_SPI_MISO
            int
            prompt "GPIO for MISO (Master In Slave Out)"
	    range 0 39	
            default 35 if LVGL_PREDEFINED_PINS_38V1
            default 19 if LVGL_PREDEFINED_DISPLAY_ADA_FEATHERWING
            default 19

            help
            Configure the touchpanel MISO pin here.

        config LVGL_TOUCH_SPI_MOSI
            int
            prompt "GPIO for MOSI (Master Out Slave In)"
	    range 0 39	
            default 32 if LVGL_PREDEFINED_PINS_38V1
            default 18 if LVGL_PREDEFINED_DISPLAY_ADA_FEATHERWING
            default 23

            help
            Configure the touchpanel MOSI pin here.

        config LVGL_TOUCH_SPI_CLK
            int "GPIO for CLK (SCK / Serial Clock)"
	    range 0 39	
            default 26 if LVGL_PREDEFINED_PINS_38V1
            default 5 if LVGL_PREDEFINED_DISPLAY_ADA_FEATHERWING
            default 18
            help
            Configure the touchpanel CLK pin here.

        config LVGL_TOUCH_SPI_CS
            int "GPIO for CS (Slave Select)"
	    range 0 39	
            default 33 if LVGL_PREDEFINED_PINS_38V1
            default 32 if LVGL_PREDEFINED_DISPLAY_ADA_FEATHERWING
            default 5
            help
            Configure the touchpanel CS pin here.
    endmenu
    
    menu "Touchpanel SPI Bus"
      visible if LVGL_TOUCH_CONTROLLER = 1 || LVGL_TOUCH_CONTROLLER = 3
      	choice
    		prompt "Touch Controller SPI Bus."
    		default LVGL_TOUCH_CONTROLLER_SPI_VSPI
    		help
    			Select the SPI Bus the TFT Display is attached to.
    	
    		config LVGL_TOUCH_CONTROLLER_SPI_HSPI
    		bool "HSPI"
    		config LVGL_TOUCH_CONTROLLER_SPI_VSPI
    		bool "VSPI"
		endchoice
    endmenu

    menu "Touchpanel Configuration (XPT2046)"
      visible if LVGL_TOUCH_CONTROLLER = 1

        config LVGL_TOUCH_X_MIN
            int
            prompt "Minimum X coordinate value."
            default 0 if LVGL_PREDEFINED_PINS_38V4
            default 200

        config LVGL_TOUCH_Y_MIN
            int
            prompt "Minimum Y coordinate value."
            default 0 if LVGL_PREDEFINED_PINS_38V4
            default 120

        config LVGL_TOUCH_X_MAX
            int
            prompt "Maximum X coordinate value."
            default 4095 if LVGL_PREDEFINED_PINS_38V4
            default 1900

        config LVGL_TOUCH_Y_MAX
            int
            prompt "Maximum Y coordinate value."
            default 4095 if LVGL_PREDEFINED_PINS_38V4
            default 1900

        config LVGL_TOUCH_INVERT_X
            bool
            prompt "Invert X coordinate value."
            default y

        config LVGL_TOUCH_INVERT_Y
            bool
            prompt "Invert Y coordinate value."
            default y

    endmenu
	
	menu "Touchpanel Configuration (FT6X06)"
      visible if LVGL_TOUCH_CONTROLLER = 2
	  
		config LVGL_FT6X36_SWAPXY
			bool
			prompt "Swap X with Y coordinate."
			default y

        config LVGL_FT6X36_INVERT_X
            bool
            prompt "Invert X coordinate value."
            default n

        config LVGL_FT6X36_INVERT_Y
            bool
            prompt "Invert Y coordinate value."
            default y

    endmenu

    menu "Touchpanel Configuration (STMPE610)"
      visible if LVGL_TOUCH_CONTROLLER = 3

        config LVGL_TOUCH_X_MIN
            int
            prompt "Minimum X coordinate value."
            default 160

        config LVGL_TOUCH_Y_MIN
            int
            prompt "Minimum Y coordinate value."
            default 230

        config LVGL_TOUCH_X_MAX
            int
            prompt "Maximum X coordinate value."
            default 3800

        config LVGL_TOUCH_Y_MAX
            int
            prompt "Maximum Y coordinate value."
            default 3800
        
        config LVGL_TOUCH_XY_SWAP
        	bool
        	prompt "Swap XY."
        	default n

        config LVGL_TOUCH_INVERT_X
            bool
            prompt "Invert X coordinate value."
            default y

        config LVGL_TOUCH_INVERT_Y
            bool
            prompt "Invert Y coordinate value."
            default y
    endmenu
endmenu